2013年04月18日
Pro-Bolt
Titanium and aluminum bolts I have orderd around 2 weeks ago arrived. I am planning to use these for Brompton. / 2週間ほど前に注文したチタンとアルミのボルトが届いた。ブロンプトンで使う予定だ。
You can find and order these at Pro-bolt online store.
これらのボルトはプロボルトのオンラインストアで購入することが出来る。
You can find and order these at Pro-bolt online store.
これらのボルトはプロボルトのオンラインストアで購入することが出来る。
s2l_x at 23:26|Permalink│Comments(0)
Titanium spndle for right side pedal / 右側ペダル用チタンシャフト
Titanium spindle for other pedal was divert for MKS compact pedal. / 他のペダル用のチタンスピンドルをMKSのコンパクトペダルに流用した。
Titanium spindles
チタン製のスピンドル2本
27g per piece, tip of this spindle was milled about a few millimeters because it was slightly longer than expected.
1本27g, 期待したよりわずかに長いため、スピンドルの先端を数ミリ削ってある。
Accembled pedal, 82g
組み立てたペダルは82g
Titanium spindles
チタン製のスピンドル2本
27g per piece, tip of this spindle was milled about a few millimeters because it was slightly longer than expected.
1本27g, 期待したよりわずかに長いため、スピンドルの先端を数ミリ削ってある。
Accembled pedal, 82g
組み立てたペダルは82g
s2l_x at 00:42|Permalink│Comments(0)
2013年04月16日
Titanium rear hinge shaft / チタン製リアヒンジシャフト
Created Brompton's rear hinge shaft from titanium. / ブロンプトンのリアヒンジ用のシャフトをチタンで製作した。
Original shaft: 30g / オリジナルは30g
Ti shaft: 17g / チタン製は17g
Original shaft and 2 Ti shafts / 元のシャフトと、チタンシャフト2本
Got 2 of them just in case / 念のため2本作ってある
Ti shafts have small slit at the end concerning disassembling without breaking the shaft like original. This slit should allow you to unscrew bolts in both ends by preventing the shaft from rortating with screw driver.
チタンシャフトには、分解時の事を考慮して、純正品のように壊さなくても良いよう、エンドにスリットを入れてある。このスリットをマイナスドライバーで固定することにより、シャフトの回転を押さえてボルトを緩めて外す事ができるはずだ。
s2l_x at 23:23|Permalink│Comments(0)