ローラー
2013年04月21日
Roller replacement - 2 / ローラーの代わりに - 2
I have made following pieces out of aluminum shaft, which should replace original rollers, based on prototype I made on the other day. / ローラーを置き換えるために、先日作った試作品をベースに、下記のようなパーツをアルミ棒から製作した
3 pairs, different length, with original roller (46g / pair including the bolt)
長さの異なる3セットと、元のローラー(ボルト込み、2個で46g)
16g / pair (this pair is in the middle of above photo).
Other pairs are 17g or 15g.
Total wight would be 19 - 21g/pair including Titanium bolts.
2個で16g (このセットは上の写真で真ん中の2つだ)
残りのセットは、17g と 15g
チタンボルト込みの合計の重さは1セット19 - 21gとなる。
3 pairs, different length, with original roller (46g / pair including the bolt)
長さの異なる3セットと、元のローラー(ボルト込み、2個で46g)
16g / pair (this pair is in the middle of above photo).
Other pairs are 17g or 15g.
Total wight would be 19 - 21g/pair including Titanium bolts.
2個で16g (このセットは上の写真で真ん中の2つだ)
残りのセットは、17g と 15g
チタンボルト込みの合計の重さは1セット19 - 21gとなる。
s2l_x at 18:26|Permalink│Comments(0)
2013年04月06日
Roller replacement / ローラーの代わりに
Currently, I am planning to remove original roller, and put something instead to stablize Brompton while folded (even without fender). 今のところ、オリジナルのローラーを取り外し、たたんだ状態のブロンプトンが(フェンダー無しでも)安定するようにローラーの代わりに何かをつけることを考えている。
Prototype, different length, made from aluminum
長さの異なる試作品、アルミ製
Prototype, different length, made from aluminum
長さの異なる試作品、アルミ製
s2l_x at 22:11|Permalink│Comments(0)